LD_1000D Hydraulic universal testing machine
LD_1000D Hydraulic universal testing machine can be used for a variety of metal materials to test their tensile, compression, bending and shear. It can also be used as plastic, concrete, cement and other nonmetallic materials’ compression test. If it is added to some simple accessories, it can complete a variety of performance tests of the tape chain, wire rope, welding electrodes, tiles and components. The machine adopts the under cylinder, low height, light weight, which is especially suit for the construction sectors.
-
The testing machine uses manual control hydraulic valves, drives precision hydraulic cylinders, and performs manual control of various modes of test force, displacement, and deformation, and completes the tensile, compression, and flexural and flexural tests of the specimen.
-
The brand computer is used to complete the setting of test parameters, data collection, processing, analysis, storage and display during the test (test data includes: upper and lower yield points, tensile strength, breaking strength, elastic modulus, elongation of each point, d0 .2 etc.), precise and accurate control and measurement.
-
Equipped with special software for Windows universal testing machine, it measures the performance parameters of each material according to national standards or standards provided by users, and performs statistics and processing on the test data, and then outputs and prints various required test curves and test reports, with test curves The functions of zooming in, comparing and traversing are smart and convenient.
-
Self-built powerful test database, test data can be saved, inquired, and recalled at any time.
-
The high-precision amplifier is used to achieve 4 levels of test force measurement, automatic switching, accurate, stable and reliable.
Technical Parameters
-
Maximum test force 1000 kN
-
Testing machine accuracy 1degree
-
Accuracy of test force indication =±1%
-
Range of test force Maximum test force 2%~100%
-
Maximum tensile test space 640mm
-
Maximum compression test space 600mm
-
Holding range of round sample F13~60mm
-
Holding range of flat specimen 0~55mm
-
Holding width 80mm
-
Top and bottom pressure plate size F200mm
-
Maximum distance between supporting rolls of bent support 400mm
-
Column spacing 580mm
-
piston stroke 200mm
-
Maximum piston speed 80mm/min
-
Maximum moving speed of beam 150mm/min
-
Oil pump motor power 2.5KW
-
Power of crossbeam moving motor 0.75kw
-
Machine size 910×740×2200mm
-
Machine weight 2000Kg