WPT_304 Water Vapor Permeability Tester
WPT_304 Water Vapor Permeability Tester
Adhesion Tester
X1003. Adhesion Tester (Standard) 0-3500 PSI (0-25MPa)
Manual colony counter
Manual colony counter LMCC Series is a reliable unit for rapid and accurate manual colony counting with multi-mode…
9776_60 or 9776_160 Low and High Pressure Calibration Guages
The 9776 Pressure Calibration Gauge is used to verify the calibration of a gauge or digital readout on an air-operated…
DEVELOPING TANK
CO.FO.ME.GRA. produces also a Plate Developing Tank with temperature control, mixing pump and quick discharging bath.
Tension and Compression Force Sensor Series R01
Tension and Compression Force Sensor Series R01
SCHOPPER RIEGLER_DIGITAL
To determine the freeness and the drainage properties of fiber and pulp suspensions.
BCT_01 Box Compression Tester
BCT_01 Box Compression Tester
Concave Adhesion Dolly
XA201. Concave Dolly 2” (51mm)
Colony Counter
Automatic Colony Counter is equipped with high resolution CCD Camera lens.
9819 Axial Load Tester Calibration Cell
The 9819 Axial Load Tester Calibration Cell is used to calibrate the Altek family of Axial Load Testers.
Compression Force Sensors Series R02
Compression Force Sensors Series R02
CANADIAN STANDARD _ MANUAL
To measure the freeness and dewatering rate of suspensions according to Canadian standards.
CANADIAN STANDARD - DIGITAL
For determining the degree of refining and the drainage rate of pulp suspensions in accordance with Canadian standards.
BCT_02 Box Compression Tester
BCT_02 Box Compression Tester
Convex Adhesion Dolly
XA215. Convex Dolly 6” (152mm)
Water jacketed CO2 Incubator LWJI A
Microprocessor PID controlled CO2 Incubator ensures optimum environment for cell and tissue culture growth.
9842 Digital Pressure Calibrator
The 9842 Digital Pressure calibrator is used to calibrate the Altek family of Buckle and Panel Testers, including the…
Tension and Compression Force Sensors Series R03
Series R03 smart sensors are designed for tension and compression measurement applications in virtually every industry.
BCT_03 Box Compression Tester
BCT_03 Box Compression Tester
Flat Adhesion Dolly
Flat Dolly for testing on flat surfaces using the Adhesion Tester.
Water jacketed CO2 Incubator LWJI B
Our water-jacket incubators are equipped with microprocessor-based PID controller which provides a precisely…
9770A or 9971B Side Wall Fixture Change Part
These change parts are used to test the outside mobility/lubricity of a can sample.
Miniature Force Sensors Series R04
Extremely compact force measurement sensor for tensile and compressive loads in applications with limited space.