FDI-01 Falling Dart Impact Tester
FD-01 Falling Dart Impact Tester is applicable in the impact test and energy measurement of the falling dart from a certain height against plastic film and sheet with a thickness less than 1 mm, which would result in 50% rated specimen failure.
Full Description
CHARACTERISTICS
-
Micro-computer calculation, LCD display and Menu interface
-
Two test methods integration: A & B
-
Built-in observation light
-
Pneumatic specimen clamp and release
-
Falling dart electromagnetic suspension and automatic release
-
Two test modes: Manual and foot pedal
-
Automatic testing data judgment
-
Multi-units result display and printing
-
Mini-printer
-
RS232 interface
PRINCIPLE
At the beginning of the test, choose test method and estimate an initial mass and Δm. Start test.
If the first specimen fails, decrease the mass of the falling dart by decreasing weight of Δm. If the first specimen is not a failure, add the mass of the falling dart by increasing weight of Δm. Test at the same time. In brief, increase or decrease the Δm according to whether the former specimen is a failure or not.
After 20 specimens, calculate the total number of failure specimens N. If N equals to 10, test over. If N is less than 10, add specimens and continue the test until N equals to 10. If N is more than 10, add specimens and continue the test until the number of non-failure specimens is 10.
Then the tester calculates the test results automatically according to a special formula.
Specifications
| Test Method | A, B (Optional) |
|---|---|
| Test Range: | Method A: 50–2000 g |
| Method B | 300–2000 g |
| Accuracy | 0.1 g (0.1%) |
| Specimen Clamping | Pneumatic |
| Gas Source Pressure | 0.6 MPa (User provides gas source themselves) |
| Dart Size | Ø38 mm hemispherical pipe |
| Specimen Size | 150 mm × 150 mm |
| Power | AC 220V, 50Hz |
| Net Weight | 70 kg |
Applicable standards
ASTM D1709, ISO 7765, JIS K7124