Rapid Köthen Dryer Table
For drying laboratory sheets made by the Rapid Köthen sheet former.
Also searched as: Rapid Köthen dryer, sheet dryer, laboratory sheet drying, handsheet dryer, 5269-2, 54358
Full Description
Rapid Köthen Dryer Table
Code: P.405.Dx
Device description
The Rapid Köthen drying table is mounted on a torsion-resistant stainless steel frame. This robust substructure houses the pump, the hot-water bath, and other components. The control module with an integrated touchscreen is located on the left side of the worktable, while the dryers are housed on the right side. To provide more workspace, only the most essential switches are installed on the tabletop. The parameters for the drying process can be conveniently controlled via the touchscreen.
Features
- premium corrosion resistant material
- easy operation via integrated touchscreen
- easy accessible main switch
- suction of air inside the dryers via vacuum pump
Connections
| Voltage | 400 V, 50 Hz |
| Compressed air | 600 kPa |
| Water | 200 kPa |
| Drain | Ø 50 mm drain pipe |
Specifications
| Water circulation | 3-6 l/min acc standards |
|---|---|
| Water temperatur | 93 – 97°C acc standards, individually adjustable |
Models
| Code | Article |
|---|---|
| P.405.D1 | Dryer Table with one dryer |
| P.405.D2 | Dryer Table with two dryers |
| P.405.D3 | Dryer Table with three dryers |
| P.405.D4 | Dryer Table with four dryers |
| P.405.D5 | Dryer Table with five dryers |
Applicable standards
ISO 5269-2; DIN 54358
More from PTE Pulp Test Equipment GmbH
View all PTE Pulp Test Equipment GmbH products →
Abrasion Tester AT 1000 TS (Einlehner)
Einlehner abrasion tester for determining the abrasiveness of pulp and stock suspensions.
Universal Thickness Gauge
For determining the thickness of paper, tissue, cardboard, leather and other materials.
BENDING STIFFNESS TESTER
To determine the bending resistance and stiffness of paper and paperboard.
Bendtsen Tester
For determining roughness and air permeability using the Bendtsen method.
Burst Pressure Tester
For determining the bursting strength and bursting energy absorption (BEA) of paper and cardboard.
STATIC FRICTION TESTER
For fast and reproducible sorting and classification of wood chips.
Tensile tester – Horizontal
For determining the tensile strength in dry or wet condition, the elongation and the tensile force absorption (TEA) of…
AT 1000 wear parts set
for (original Einlehner) abrasion tester
Tensile Tester – Vertical
For determining the force, tensile resistance, elongation and tensile force absorption (TEA) in paper, cardboard…
Double / Twin Folding Endurance Tester
Determines the folding resistance of paper according to the Louis Schopper method.
Elmendorf Tear Tester
For determining the tensile strength of paper and similar materials.
BEKK Smoothness Tester
For determining the smoothness of paper or cardboard using the BEKK method.