Speed Dryer
For drying paper and pulp sheets or for determining the mass of sludge.
Also searched as: speed dryer, sheet dryer, pulp sheet drying, paper drying, T205
Full Description
CODE: P.101.XXX
Device description
The Speed Dryer is a sturdy device with a high-quality stainless steel housing that surrounds the aluminum heating plate. The housing prevents contact with the heating plate. The lightweight cover is lined with a special fabric to press the sheet being dried against the heating plate during the drying process and prevent the sheet from warping. The maximum temperature is 180°C. Four different sizes are available. The largest model can dry up to six TAPPI standard sheets at the same time.
Features
- highest quality and workmanship
- sturdy stainless steel housing
- special heating plates for even heat distribution
- light-weight dryer lids
- ON/OFF switch on the front of the device
- adjustable temperature (up to 180°C ± 1°C max deviation)
- highly breathable dryer fabric for optimal steam evaporation
- easily exchangeable spare dryer cloth
Connections
| Voltage | 110–240 V, 50/60 Hz AC |
Models
| Code | Size |
|---|---|
| P.101.350 | 350 x 350 mm |
| P.101.480 | 480 x 480 mm |
| P.101.580 | 580 x 430 mm |
| P.101.900 | 900 x 400 mm |
Applicable standards
TAPPI T205
More from PTE Pulp Test Equipment GmbH
View all PTE Pulp Test Equipment GmbH products →
Abrasion Tester AT 1000 TS (Einlehner)
Einlehner abrasion tester for determining the abrasiveness of pulp and stock suspensions.
Universal Thickness Gauge
For determining the thickness of paper, tissue, cardboard, leather and other materials.
BENDING STIFFNESS TESTER
To determine the bending resistance and stiffness of paper and paperboard.
Bendtsen Tester
For determining roughness and air permeability using the Bendtsen method.
Burst Pressure Tester
For determining the bursting strength and bursting energy absorption (BEA) of paper and cardboard.
STATIC FRICTION TESTER
For fast and reproducible sorting and classification of wood chips.
Tensile tester – Horizontal
For determining the tensile strength in dry or wet condition, the elongation and the tensile force absorption (TEA) of…
AT 1000 wear parts set
for (original Einlehner) abrasion tester
Tensile Tester – Vertical
For determining the force, tensile resistance, elongation and tensile force absorption (TEA) in paper, cardboard…
Double / Twin Folding Endurance Tester
Determines the folding resistance of paper according to the Louis Schopper method.
Elmendorf Tear Tester
For determining the tensile strength of paper and similar materials.
BEKK Smoothness Tester
For determining the smoothness of paper or cardboard using the BEKK method.